Serial to USB

Debugger · Post by **Debugger** » Sat Jun 14, 2003 4:46 pm

Is there any way to convert the LK204-25-WB-VPT's serial I/O to USB

?

1=+5V, 2=Data-, 3=Data+, 4=Ground

According to the diagram, the LCD uses only 4 pins from the serial connector, so I suppose it could be rather easy to connect the four cables to their respective Motherboard USB pins.

I've got two questions:

Could it be possible to do it?
If so, Data+ corresponds to Data FROM or TO the lcd?

Thanks in advance

,
Debugger

SilmarilS · Post by **SilmarilS** » Sat Jun 14, 2003 8:39 pm

No! you can't connect your lcd that way...

the serial and USB protocol and speed are not the same...
I know that are USB--)Serial converter but I don't think that it exist for serial--)USB...

Miles · Post by **Miles** » Mon Jun 16, 2003 9:05 am

Hello...

If you want to use your serial display and connect it to a USB port on your computer this can be done via a USB/Serial converter...