Is there any way to convert the LK204-25-WB-VPT's serial I/O to USB ?
1=+5V, 2=Data-, 3=Data+, 4=Ground
According to the diagram, the LCD uses only 4 pins from the serial connector, so I suppose it could be rather easy to connect the four cables to their respective Motherboard USB pins.
I've got two questions:
Could it be possible to do it?
If so, Data+ corresponds to Data FROM or TO the lcd?
Thanks in advance ,
Debugger
Serial to USB
No! you can't connect your lcd that way...
the serial and USB protocol and speed are not the same...
I know that are USB--)Serial converter but I don't think that it exist for serial--)USB...
the serial and USB protocol and speed are not the same...
I know that are USB--)Serial converter but I don't think that it exist for serial--)USB...
VFD2041-V -- System Status -- Internal
LK402-12-V -- MP3 Remote -- External
LCD2041-WB-V -- 2nd System Info -- Not installed
LK402-12-V -- MP3 Remote -- External
LCD2041-WB-V -- 2nd System Info -- Not installed