I've searched the forum, looked at the documentation, and been all over this site and still have some really basic questions. Bear with me....hopefully, I won't sound like too much of an idiot.
1. Is the keypad that is part of the BLK202A just a convenience feature? Is there anything that it does that can't be done with the software? I'm leaning towards the BLC2021 model because I like the clean looks, but don't want to regret not getting the keypad.
2. Is there any way to get the -BR cable option for the BLC2021?
3. I assume that the standard cable is normally routed from the back of the display, through a PCI slot, and then up to the serial port. Is this correct?
Thanks for your patience and replies.
BLC2021 vs. BLK202A
-
Adam
- Matrix Orbital
- Posts: 331
- Joined: Wed Feb 27, 2002 4:00 pm
- Location: The highest level on a short building
- Contact:
1. By using software you will not need a keypad overlay though it is a nice feature to our bay inserts.
2. Unfortunaly the 4BR option only comes with the BLK202A series of display.
3. You are correct. I have heard of some people takeing a spare PCI cover and cutting a hole in it which the serial cable might be slipped through. This might be an option for you.
Best Regards
2. Unfortunaly the 4BR option only comes with the BLK202A series of display.
3. You are correct. I have heard of some people takeing a spare PCI cover and cutting a hole in it which the serial cable might be slipped through. This might be an option for you.
Best Regards
