Page 1 of 1
Posted: Tue Mar 26, 2002 4:59 pm
by M0rt
Hi
i have a GLK12232-25, i just Wiped module file system in mogd.exe!!
wot does that do and how can i reverse it as i cant seem 2 upload anything 2 it
Posted: Tue Mar 26, 2002 10:24 pm
by Henry
turn the display off, and then try again... if that doesn't work, open hyper terminal and see if you cen get keypresses to display there. Or try using Version program to see if you can get type or version from the display.
_________________
Henry J.
Technical Support
Matrix Orbital
<font size=-1>[ This Message was edited by: Henry on 2002-03-26 22:25 ]</font>
Posted: Tue Mar 26, 2002 10:39 pm
by M0rt
ok turned it off
i cant seem 2 get it working with lcd smartie and it keeps messing up, the screen fandomly messing up etc etc
any ideas
Posted: Tue Mar 26, 2002 10:56 pm
by M0rt
i'm having a lot of hassle with my lcd and its not doing wot i want it 2 =[
also was under the impression that it was blue on white, instead this lcd is black on green, WTF!!
some help please?
Posted: Tue Mar 26, 2002 11:14 pm
by Henry
1. LCD Smartie and Graphic LCD do not mix.
LCD Center 2.0
LCDC
LCD Stats
2. Ther are 2 version of the GLK12232, the GLK12232-25 and GLK12232-25-WBL... double check what you actualy bought and if you bought it from us, contact adam (
alintott@matrixorbital.com) and talk to him...
Posted: Wed Mar 27, 2002 7:55 am
by M0rt
i think the 1 i have recieved is the 1 without the WBL bit, but i ordered the blue 1 so that was the 1 i was meant 2 get
i'll email him later
thanks 4 ure help