Page 1 of 1
MX610 Top line of text missing
Posted: Wed Oct 04, 2006 4:42 am
by anand64
My MX 610 [LK202-24-USB] PCB Rev:1.6 which i had brought from Performance-PCs around 6 mths back was working fine.But now the top portion of the text is missing[see attachment].I tried uninstalling and reinstalling and also on my second computer but the problem is still there.I contacted Hank at performance-pcs,who redirected me here.
Any help/advice would be greatly appreicated.
Posted: Wed Oct 04, 2006 1:04 pm
by Raquel
anand64 has been contacted by the RMA department.
Thank you for the post.
Posted: Wed Oct 04, 2006 2:31 pm
by anand64
Raquel wrote:anand64 has been contacted by the RMA department.
Thank you for the post.
Thank you for your quick response.I was able to solve the problem by applying a little pressure to the rubber beading around the display and now the display is working fine.I do not know what the problem was,maybe some loose contact.Anyway if the problem persists i will surely contact you for warranty support.
Thanks once again
Posted: Mon Feb 19, 2007 5:38 pm
by soundx
My MX610 has developed a similar problem.
But pressure doesn't seem to fix it.
I'd appreciate someone contacting me as well
soundx98 AT DIY-Street DOT com
Thank You
Posted: Tue Feb 20, 2007 10:57 am
by Raquel
Hello soundx,
Sure, I am going to get the RMA dept to contact you:
soundx98@DIY-Street.com is this right?
Thanks,
Posted: Fri Apr 20, 2007 8:30 pm
by invalidbuffalo
I had a similar issue with my MX610, but I was able to fix it by wedging some folded thick paper between the faceplate and the display package near the zebra strip.