Serial to USB
Posted: Sat Jun 14, 2003 4:46 pm
Is there any way to convert the LK204-25-WB-VPT's serial I/O to USB ?
1=+5V, 2=Data-, 3=Data+, 4=Ground
According to the diagram, the LCD uses only 4 pins from the serial connector, so I suppose it could be rather easy to connect the four cables to their respective Motherboard USB pins.
I've got two questions:
Could it be possible to do it?
If so, Data+ corresponds to Data FROM or TO the lcd?
Thanks in advance ,
Debugger
1=+5V, 2=Data-, 3=Data+, 4=Ground
According to the diagram, the LCD uses only 4 pins from the serial connector, so I suppose it could be rather easy to connect the four cables to their respective Motherboard USB pins.
I've got two questions:
Could it be possible to do it?
If so, Data+ corresponds to Data FROM or TO the lcd?
Thanks in advance ,
Debugger