Join the dots!

zander · Post by **zander** » Mon Jan 05, 2004 2:55 pm

Ok, I'm being pretty slow here I think!

Created a custom keypad with a selection of switches, just trying to wire them up but want to make sure I do it right!

There is a set of 4 in close proximity and another 2. Just going to take another go myself but any help would be appreciated!

Brillig · Post by **Brillig** » Tue Jan 06, 2004 5:30 pm

Did you get this figured out? I could help if you have not.

zander · Post by **zander** » Wed Jan 07, 2004 5:15 am

At work at the mo so can't upload the diagram of how I think i'll try it.

Basicly wired contact 1 of each switch in the four cluster together to a row then contact 2 to each column. Then I did the same with the second cluster of two but the other way round.

If I get a chance i'll try it this evening, but if you feel like playing in paint i'd appreciate confirmation that what i'm doing is right!

Thanks for the help!

zmoreira · Post by **zmoreira** » Tue Feb 03, 2004 9:02 am

Brillig wrote:Did you get this figured out? I could help if you have not.

Brillig: I am wondering how to do the same thing, can you help? Just a quick hot-to to get me started...

zander · Post by **zander** » Tue Feb 03, 2004 3:14 pm

Mine worked the way I did the diagram, just as long as you connect each switch to one row and one column.