How to connect a LED to the Rx/Tx Pins

NoOnE · Post by **NoOnE** » Fri Dec 26, 2003 10:54 am

the topic says it all - i have made a picture and "build-in" my ideas of installing the leds - maybe one of them is the right one.

thx NoOnE

Post by **Henry** » Mon Dec 29, 2003 12:22 am

Red circles

urtigao · Post by **urtigao** » Thu Feb 05, 2004 9:12 am

I've two 3,6 Volt Led that i want to connect to Rx and Tx pins.
My question is: where do i put the resistances ? In what pins ? and if a value os 100 ohm is ok ?
Thanks in advance

Miles · Post by **Miles** » Thu Feb 05, 2004 2:18 pm

Please see the following link for an in-depth look at this topic. If you have any further questions, feel free to post them...

http://www.lcdforums.com/forums/viewtopic.php?t=1527

How to connect a LED to the Rx/Tx Pins

How to connect a LED to the Rx/Tx Pins

Two 3,6 Volt Led to RX /Tx. Where to put the resistances ?