I have created a new topic, because the problem with VK202-24-USB was cleared out.
I have done tests with your program and here are my results:
______________________________________________________________________
GPO-1 ... TDF-6010L12C
GPO-2 ... TFD-9225L12C
GPO-3 ... TDF-6020L12C
______________________________________________________________________
GPO-1 ... TDF-6020L12C
GPO-2 ... TDF-6010L12C
GPO-3 ... TFD-9225L12C
______________________________________________________________________
GPO-1 ... TFD-9225L12C
GPO-2 ... TDF-6020L12C
GPO-3 ... TDF-6010L12C
FANS were:
1. Titan TDF-6010L12C DC12V/-A (not sure if it is exact)
2. Titan TDF-6020L12C 12V/0.16A
3. Titan TFD-9225L12C 12V/0.10A
Notice:
- Fans act exatly same as I described thereinbefore (Wed Oct 22, 2003 6:43 pm)
- Between tests the computer was always powered down.
- I enter the RAW comands for GPO-1, but with no results.
hm, it seem, that there still only one HP GPO (2) full functional ;(((
once more THANX for your help.
EDIT: Thu Oct 30, 2003 9:35 pm
I have done another little test with the 1-Wire sensor/PWM feature.
What I have found out:
#1 GPO - no PWM and no RPM reporting capable
#2 GPO - PWM and RPM OK
#3 GPO - PWM OK but no RPM
So what to do now? ;(
Is my beloved MX200 a fault unit? ;(((