LK204-25 Not working??

Ryanr · Post by **Ryanr** » Tue May 27, 2003 10:02 pm

Today I pulled out my dusty lcd and tryed to start working with it, but to my desmay it didn't work. When I plug it in it turns on and everything. The thing is that it all the character spaces are black boxes. Their is one thing I can do and that is turn the back light on and off, but that is it.
Thanks all.

SilmarilS · Post by **SilmarilS** » Wed May 28, 2003 1:03 am

It seems that the contrast setting is Way too high....
Try to lower it with the MO software

Miles · Post by **Miles** » Wed May 28, 2003 2:51 pm

Hello...

Using our AlphaDemo software, available in our downloads section, try lowering the contrast. If this does not work then send text and from a 6 o'clock viewing angle, see if you can see the text...

Ryanr · Post by **Ryanr** » Wed May 28, 2003 4:25 pm

Lowering the contrast didn't work, but when I view with a 6 o'clock veiwing angle I can see the text.

Miles · Post by **Miles** » Thu May 29, 2003 8:58 am

From what you told me we can establish that the unit can communicate with the host system however a problem lies in the contrast cct. If you email me at myero@matrixorbital.com we can discuss RMA options...