LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series
Moderators: Henry , Mods
kdm3170
LCD?
Posts: 2 Joined: Sat Mar 22, 2003 1:38 pm
Post
by kdm3170 Sat Mar 22, 2003 1:41 pm
I just received my LK204-25 display, and all that gets displayed is jibberish. I downloaded and ran the alphanumeric tester, and all the display shows is jibberish. Also, the lines are written out of order. Any help would be greatly appreciated. Thanks
Henry
OMNIPRESENT
Posts: 3014 Joined: Tue Aug 14, 2001 6:00 pm
Contact:
Post
by Henry Mon Mar 24, 2003 11:53 am
Are you talking to the display at 19.2K? are you using a straight through serial cable?
Henry J.
kdm3170
LCD?
Posts: 2 Joined: Sat Mar 22, 2003 1:38 pm
Post
by kdm3170 Mon Mar 24, 2003 12:54 pm
Henry wrote: Are you talking to the display at 19.2K? are you using a straight through serial cable?
Yes I am using both.
Hallis
LCD Geek
Posts: 27 Joined: Wed Mar 19, 2003 10:40 pmLocation: Dallas, Tx
Contact:
Post
by Hallis Mon Mar 24, 2003 1:16 pm
try removing the com port in the device manager and restarting,, i had that problem this morning with my lcd and that fixed it
Henry
OMNIPRESENT
Posts: 3014 Joined: Tue Aug 14, 2001 6:00 pm
Contact:
Post
by Henry Thu Mar 27, 2003 10:49 pm
Is your problem fixed?
Henry J.
