please help

LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series

Moderators: Henry, Mods

Post Reply
ng1j
LCD?
Posts: 4
Joined: Thu May 02, 2002 6:00 pm

Post by ng1j »

I have a BLK202A-4BR.
There are many weird characters showing on the LCD display when the computer boots up!

When I start running LCDC, more and more weird characters show on the LCD.

I get the same problem with running the LCDsmartie.

I tried to reset it by putting a jumper on C5R1. It can not be fixed !!

what is the problem with my MO LCD ??????

anyone can help, please ........
thanks guys !!

GreatOldOne
LCD Geek
Posts: 26
Joined: Sun May 12, 2002 6:00 pm
Location: Northampton, UK
Contact:

Post by GreatOldOne »

It's normal - when windows boots, it does something with the COM ports and spits a whole load of crap down it. These show up on you're display. I get it on my VK-204-25. As soon as LCDC fires up, it cleard the display and away you go.

Mat-Moo
LCD Guru
Posts: 502
Joined: Wed Jan 16, 2002 4:00 pm
Contact:

Post by Mat-Moo »

If your getting weird/wrong characters showing when LCDC is running then it sounds like the baud rate is wrong. Make sure it's set to 19200 and try resetting the LCD module

ng1j
LCD?
Posts: 4
Joined: Thu May 02, 2002 6:00 pm

Post by ng1j »

thanks guys ..

I have another problem now !!
after I reset the LCD module,
no more weird character shows on the LCD
instead, there are full of "bar" character on the both lines ...

how to fix this problem ??
pls help ....... thanks ...

ng1j
LCD?
Posts: 4
Joined: Thu May 02, 2002 6:00 pm

Post by ng1j »

hi,

this pic. shows the problem I have ..

<img src="http://www.urphoto.com/users/39883/2370 ... 6liequ.JPG">

I am a newbie of MO display
Please tell me how to reset it properly or fix this problem .. THANK YOU VERY MUCH

http://www.hkrip.netfirms.com/index.html

Henry
OMNIPRESENT
OMNIPRESENT
Posts: 3010
Joined: Tue Aug 14, 2001 6:00 pm
Contact:

Post by Henry »

Do the manual over ride and then try adjusting the contrast...
Henry J.
President
Matrix Orbital

Post Reply