MX4 Displays right to left, bottom to tp

ehj666 · Post by **ehj666** » Fri Jul 31, 2009 4:06 am

Hi all,

Sorry if this has been asked before, I did not see it in a search of the forum. My MX4 series LCD display had been working fine, then suddenly started displaying the text left to right and bottom to top. IOW the right characters are being displayed and in the correct orientation, just in the wrong order and on the wrong lines on the display.

The display was originally driven by lcdproc on linux, but for purposes of testing, I loaded the windows drivers and ran the test programs (boot screen for example) and they are giving the same results.

Stranger still, before I started running the windows test programs, on initial power-up, the "Matrix Orbital MX4" identification would display correctly. Now that is displaying right to left and bottom to top as well.

I do not see a command in the manual which allows inverting the display in this manner.

Is my unit fubar, or is there a way to fix this.

Thanks,
Eric

Raquel · Post by **Raquel** » Fri Jul 31, 2009 10:18 am

Hi Eric,

Thanks for posting on the forum.

I am sorry but I think the display has been damaged. It seems that the driver of the screen itself has given up. There is no control / command that inverts the way the display shows the character on the screen.

If you would like to get it repaired, please drop an email to support@matrixorbital.ca

Thanks and Best Regards,