OK, so trying to get a Typhoon to work on Vista 64.
Following the instructions as posted here - http://www.lcdforums.com/forums/viewtopic.php?t=3763
1 - Driver Core = Dead link! Great start!
2 - LCD Studio = Fine, installed it, but no good without (1) I assume.
3 - .Net 2.0 = I assume you do not need to do this with Vista 64 SP1?
Drivers should install on their own but that obviously failed here, can you manually install the drivers? Right click your GX in the device manager, click the proposed "install drivers" button and point it to C:\program files\Matrix orbital drivercore\drivers if it asks for drivers.
Ray wrote:Drivers should install on their own but that obviously failed here, can you manually install the drivers? Right click your GX in the device manager, click the proposed "install drivers" button and point it to C:\program files\Matrix orbital drivercore\drivers if it asks for drivers.
Seemingly all working - Phew!
Why does the LED keep flashing at random on the IR? It's annoying?
IR lights up whenver it sees an IR signal, could be anything from direct sunlight to a rouge remote somewhere in your home that emits IR whenver it feels like it. You can turn off the IR completly but not just the LED. I'll add that to the wishlist for future firmware upgrades.
Ray wrote:IR lights up whenver it sees an IR signal, could be anything from direct sunlight to a rouge remote somewhere in your home that emits IR whenver it feels like it. You can turn off the IR completly but not just the LED. I'll add that to the wishlist for future firmware upgrades.
It's sitting on a desk in my study between a monitor and a PC... Yet it flashes periodicallly?
If the IR is turned off, surely it won't detect anything, so the LED won't light up?
EDIT! ARGH! This red light flashing at random is doing my head in!!
