PK162-12 size reduction..

mmx87 · Post by **mmx87** » Mon Apr 04, 2005 4:08 pm

Well, I want to try to get the PK162-12 PLED display to be under 2CM in thinkness. I'm trying to find a display that will be portable enough for the mp3 player I am making... (I don't have the LCD yet).

I'd like to be able to remove the three connectors on the back of the board, if possible:

1. DB9 serial connector
2. 2x12 Berg strip
3. 4 pin berg floppy power connector

I don't need I2C or Keypad inputs...I just need to be able to solder the serial and power wires onto the LCD.

I have tried looking elsewhere, but most people do not have these displays in stock..

Thanks in advance,

-Brad

Tom · Post by **Tom** » Mon Apr 04, 2005 5:03 pm

Hi Brad,

Thanks for posting.

To double check the size of the unit you can refer to page 37 on the manual at http://www.matrixorbital.com/files/PK162-12.pdf .

Depending on quantity, you will be able to order the displays without the connectors. To inquire about quantities and sales, please email sales at sales@matrixorbital.ca .

If you have any other questions or concerns, please feel free to post.

Best Regards,