Interesting Temp Sensor.. I think it will work...

[Eddiie]

Came across these... Will they work? I got 4. The interesting thing is that it says they are calibrated for Farenheit (spelling?). ?

!

http://www.allelectronics.com/cgi-bin/c ... type=store

Did that link work?

[Johnny]

Yes, the link works but i dont think that probe will.

That sensor looks identicle to the Dallas 1-wire, but as far as I am aware, the only sensors detected in LCDC at the moment are the DS1820 and the DS18B20.

[Mat-Moo]

Don't think so, as they probbaly won't work with the dallas one wire protocol that is needed to talk to the probe.

[Elliyanna]

Eddiie,

Sorry these will not work.
These are thermal transistor not 1 wire devices.

The temp probes for the MX are Dallas 1 wire devices.
To try and clarify a 1 wire device is not a simple probe it is a complete device that communicates data over 1 wire.

To have a better understanding take a look at http://www.ibutton.com (all of the devices listed there are 1 wire devices)

Hope this helps

Elliyanna

[at_mosby]

So Sad that I didn't do enough research before I purchased the inline temprature probes. Well, at least I found out the answer *before* adding water to the case!

Oh well, now I'll just have to build my own inline sensor set using Dallas 1 wire devices.