DE-LM106, issues

Take a load off and chat!

Moderators: Henry, Mods

Post Reply
Posts: 1
Joined: Thu Sep 03, 2009 9:04 am

DE-LM106, issues

Post by bouvett »


i have just started my first graphical lcd project, which will involves the interfacing of a GLCD with a microcontroller. the lcd i bought is the de-lm106 whose datasheet is ... Module.pdf

now i cannot find info about how to configure the lcd such as initial settings or that sort of info. i have found one datasheet about this lcd, i setup the code of the microcontroller but when i tried it out nothing worked, all i did is reset the graphical lcd, switched on the display and started inputting data.

the code is attached just in case( it is in assembly and for PIC micros)

any help will be greatly appreciated.

thanks guys

Posts: 2880
Joined: Tue Aug 14, 2001 6:00 pm

Post by Henry »

Hello and welcome,

these forums are for Matrix Orbital products only... and I would recommend our intelligent graphic LCD for your project, it will be significantly easier and faster.
Henry J.
Matrix Orbital

Post Reply