Page 1 of 1
Posted: Thu Sep 12, 2002 5:29 pm
by CyPher
i shorted out GPO 1 on my lk02425 pc (please don't ask) , now its putting out a constant 7.1V...guess GPO1 is effectivly fried eh?
Posted: Fri Sep 13, 2002 9:38 pm
by Henry
If you fried ONE GPO to ground, then the GPO would be blown up.
V=IR
12V = I * 0 ohm (GPO has no resistors unlik on a LK202-25 or so)
I = 12V / 0 ohm
which equals infinite current, thuss blowing up the GPO.. this lesson has been brought to you be the letter A...
Posted: Fri Sep 13, 2002 10:30 pm
by CyPher
and by the letter S, for Stupidity in shorting it out in the first place
o well...time to get out the soldering iron....
Posted: Fri Sep 13, 2002 10:30 pm
by Henry
On 2002-09-13 22:30, CyPher wrote:
and by the letter S, for Stupidity in shorting it out in the first place
o well...time to get out the soldering iron....
if you want we can send you a new 335 MOSFET...
Posted: Sun Sep 15, 2002 4:02 pm
by CyPher
i have one.....replacing it is going to be the fun part...ill have to sharpin my soldering tip....will post a few pics...
Posted: Mon Sep 16, 2002 3:02 pm
by CyPher
such a tiny little part.....
Posted: Mon Sep 16, 2002 3:14 pm
by Henry
yes they are...
Posted: Mon Sep 16, 2002 3:44 pm
by Psychodaemon
or that is a waaay huge finger
Posted: Mon Sep 16, 2002 3:45 pm
by Henry
LOL...