Matrix Orbital Corp

Posted: **Sat Jul 27, 2002 10:11 pm**

I have a BLK202A-4BR.
There are many weird characters showing on the LCD display when the computer boots up!

When I start running LCDC, more and more weird characters show on the LCD.

I get the same problem with running the LCDsmartie.

I tried to reset it by putting a jumper on C5R1. It can not be fixed !!

what is the problem with my MO LCD ??????

anyone can help, please ........
thanks guys !!

Posted: **Mon Jul 29, 2002 2:18 am**

It's normal - when windows boots, it does something with the COM ports and spits a whole load of crap down it. These show up on you're display. I get it on my VK-204-25. As soon as LCDC fires up, it cleard the display and away you go.

Posted: **Mon Jul 29, 2002 2:27 am**

If your getting weird/wrong characters showing when LCDC is running then it sounds like the baud rate is wrong. Make sure it's set to 19200 and try resetting the LCD module

Posted: **Tue Jul 30, 2002 10:53 pm**

thanks guys ..

I have another problem now !!
after I reset the LCD module,
no more weird character shows on the LCD
instead, there are full of "bar" character on the both lines ...

how to fix this problem ??
pls help ....... thanks ...

Posted: **Mon Aug 19, 2002 6:31 am**

hi,

this pic. shows the problem I have ..

<img src="http://www.urphoto.com/users/39883/2370 ... 6liequ.JPG">

I am a newbie of MO display
Please tell me how to reset it properly or fix this problem .. THANK YOU VERY MUCH

http://www.hkrip.netfirms.com/index.html

Posted: **Mon Aug 19, 2002 11:23 am**

Do the manual over ride and then try adjusting the contrast...

Matrix Orbital Corp

please help