Page 1 of 1
Posted: Fri Jun 28, 2002 5:31 am
by Sjaak
This is something i'm working on now. Still in a early stage. But you probably get the idea.
Posted: Fri Jun 28, 2002 7:24 am
by banished
You're doing some great work there Sjaak, I can't wait to get my lcd working properly so that I can use your stuff. Are you planning to incorporate all of your displays into one program?
<font size=-1>[ This Message was edited by: banished on 2002-06-28 07:24 ]</font>
Posted: Fri Jun 28, 2002 9:30 am
by Henry
WOW...
Posted: Wed Jul 03, 2002 4:09 am
by Sjaak
First beta version is now online.
http://www.xs4all.nl/~hansolo1/lcd.htm
If you have comments or suggestions, please post them in this topic.
Posted: Wed Jul 03, 2002 11:00 am
by Henry
It doesn't seem to want to work for me... it will not see MBM (running V5)...
Posted: Wed Jul 03, 2002 12:08 pm
by Sjaak
I used version of MBM 5.1.9.1, which has a new shared memory layout. Maybe that is the problem?
Posted: Wed Jul 03, 2002 1:33 pm
by Henry
hmmm, 5.1.0.7 here.. I'm going to upgrade and try again...
Posted: Thu Jul 04, 2002 11:38 am
by Henry
In the software it shows tons lines in it right away, there is no sensor or screen name, but all the min vaues are 904 and max is 5443760...
Posted: Thu Jul 04, 2002 12:27 pm
by Sjaak
Sorry, my mistake. Didn't test it without the proper registry settings. I've uploaded a new version which should fix this.
But before you try it, delete the HKEY_LOCAL_MACHINESoftwareGLCD key.
<font size=-1>[ This Message was edited by: Sjaak on 2002-07-04 12:29 ]</font>
Posted: Thu Jul 04, 2002 12:57 pm
by Henry
OK, working now!!! SWEET>...
Posted: Thu Jul 11, 2002 2:50 am
by Sjaak
New version which can display Windows Performance Data. So now you can monitor network, drives, memory, processor etc.
http://www.xs4all.nl/~hansolo1/lcd.htm
<font size=-1>[ This Message was edited by: Sjaak on 2002-07-11 03:22 ]</font>
Posted: Fri Jan 09, 2004 3:11 pm
by Mr.X
Is this program still being maintained? I just tried it on my GLK12232-25-SM and it doesn't work - I get ascii characters but no graphics...
This was the only program I've found that actually does graphics on my graphical display. LCDC seems to just make the screen emulate a 4x20 text display...