Page 1 of 1
Posted: Thu Jun 27, 2002 9:05 am
by banished
Ok, I just got my GLK12232-25-SM and I cannot get iit to display the bargraphs, big text letters (4-line clock) or any spectrum analysers-- it just gives me numbers instead. Do I need to load a text file? Please help.
Thanks
Posted: Thu Jun 27, 2002 9:32 am
by Henry
Sounds more like a speed issue... use MOGD to see first if you can talk to the display, and display some text. What software are you trying to use? Sjaaks plugin works great!
Posted: Thu Jun 27, 2002 11:10 am
by banished
I'm trying to use lcdc and I've tried Sjaak's program and neither will work. I know my lcd works because I can get lcdc to display time/date and other simple 1-line things, but nothing much more advanced.
Posted: Thu Jun 27, 2002 1:53 pm
by banished
Also, while running lcdc, the virtual display also shows these numbers instead of bar graphs, large numbers, etc.
Posted: Sat Jun 29, 2002 5:04 am
by Cheese
Try following
http://users.ox.ac.uk/~some0814/The%20G ... guide..doc and see if you can get lcdc to work for text. Bar graphs need a little more work anyway, and equalizers are a big no no in lcdc
Let me know how you go on, cheers,
Rob.
Posted: Wed Jul 03, 2002 7:58 am
by banished
Thanks Cheese, but text has not been a problem, I just wanted to get a little more use out of the software.
Posted: Thu Jul 04, 2002 2:52 pm
by Cheese
I can't help with Sjaak's program - henry stole my graphic lcd from under my nose before it was released*
For bargraphs in lcdc you need to add the bargraph characters to the font you're using and then add a line to the lcdc def. file which tells lcdc where to find your characters in the character set - I forget the exact command line, ask mat on the lcdc forums.
Cheers,
Rob.
*This story isn't very factual but I like it
