Page 1 of 1
Posted: Thu Jun 13, 2002 7:01 pm
by snow-munki
just a quick question but is it safe to leave the backlight on all the time ? as it does warm up slightly ....
if not how do i say turn it off after X mins ?
read the manual.. but don't really understand it.
Posted: Thu Jun 13, 2002 8:39 pm
by CriticalPoint
I leave my dead LCD on all the time, it gets very slightly warm, but nothing dangerous. But as I said, mine is a dead one and all it does is backlight.
Posted: Fri Jun 14, 2002 9:28 am
by snow-munki
umm so why do u have it on all the time may i ask ?
Posted: Fri Jun 14, 2002 12:51 pm
by mookie85
that's kinda what i was wondering.
Posted: Fri Jun 14, 2002 1:28 pm
by Henry
The backligh is rated to 100,000 hours +/-
Posted: Fri Jun 14, 2002 2:00 pm
by snow-munki
so should i change the timeout when backlight turns of to less mins ? or just leave it ?
Posted: Fri Jun 14, 2002 3:14 pm
by Henry
I wouldn't worrie about it, never have never will
Posted: Fri Jun 14, 2002 7:07 pm
by CriticalPoint
I leave it in because there is no point in taking it out, since it is cut into my case, it just is a big hole there without it. Besides, it makes a good nightlight, and who does not use a nightlight.
Posted: Mon Jun 17, 2002 11:33 am
by Henry
On 2002-06-14 19:07, CriticalPoint wrote:
I leave it in because there is no point in taking it out, since it is cut into my case, it just is a big hole there without it. Besides, it makes a good nightlight, and who does not use a nightlight.
The GLK24064-25-CCFL is the bigest night light I have ever used...
You can read next to that thing!!