GPO boot status for LK204-25PC
-
- LCD!
- Posts: 12
- Joined: Tue Feb 19, 2002 4:00 pm
- Location: Brisbane, Australia
I have the following configuration:
GPO1:Fan GPO2:Fan GPO3:Fan GPO4:Fan GPO5:Neon
at the moment I don't have anything connected to the other GPOs.
When I switch the computer on (cold boot) GPOS 1-3 are off by default, and GPOS 4&5 are on by default - ie one fan and the neon come on when I hit the power switch. Once the machine boots and LCDC starts it switches GPO 4 & 5 off.
Is there anyway to program the LCD so that upon boot all the GPOs are off ? It just seems strange that some are on, and some are off.
I haven't tested the other GPOs to see their status on boot as 7 & 8 are unwired, but 6 is wired just nothing connected as yet.
I'd just like to say Matrix Orbital LCDs rock and so does LCDC
GPO1:Fan GPO2:Fan GPO3:Fan GPO4:Fan GPO5:Neon
at the moment I don't have anything connected to the other GPOs.
When I switch the computer on (cold boot) GPOS 1-3 are off by default, and GPOS 4&5 are on by default - ie one fan and the neon come on when I hit the power switch. Once the machine boots and LCDC starts it switches GPO 4 & 5 off.
Is there anyway to program the LCD so that upon boot all the GPOs are off ? It just seems strange that some are on, and some are off.
I haven't tested the other GPOs to see their status on boot as 7 & 8 are unwired, but 6 is wired just nothing connected as yet.
I'd just like to say Matrix Orbital LCDs rock and so does LCDC
-
- LCD!
- Posts: 12
- Joined: Tue Feb 19, 2002 4:00 pm
- Location: Brisbane, Australia
i dont think it will work that way docter bob....i beleave we have to return our displays in exchange for ones with new code.....but, considering how fast mo can deliver them, it should only be a few days round trip...Fantastic.
Feel free to use me as a crash test dummy
<font size=-1>[ This Message was edited by: CyPher on 2002-05-08 21:16 ]</font>
-
- LCD!
- Posts: 12
- Joined: Tue Feb 19, 2002 4:00 pm
- Location: Brisbane, Australia
Too bad we can't flash it...On 2002-05-08 21:16, CyPher wrote:
i dont think it will work that way docter bob....i beleave we have to return our displays in exchange for ones with new code.....but, considering how fast mo can deliver them, it should only be a few days round trip...
By the way Henry, with the new version, will we be able to "save" the boot status of the GPO's? would be nice to have some of them turned on at boot
awesome....and just as im getting some cathodes to wire up to it
multimedia.man@nf.sympatico.ca
<font size=-1>[ This Message was edited by: CyPher on 2002-05-21 21:06 ]</font>
multimedia.man@nf.sympatico.ca
<font size=-1>[ This Message was edited by: CyPher on 2002-05-21 21:06 ]</font>
-
- LCD!
- Posts: 12
- Joined: Tue Feb 19, 2002 4:00 pm
- Location: Brisbane, Australia