Page 1 of 1
Posted: Tue Apr 30, 2002 2:43 pm
by boycee
Im after a plug-in or software that shows the network traffic on a particular network card.
whether it be Network or LAN. looking for total uploaded and downloaded and maybe connection speed.
Cheers if anyone can point me in the right direction
Posted: Tue Apr 30, 2002 3:06 pm
by gb5766
Posted: Tue Apr 30, 2002 3:10 pm
by boycee
cheers m8
Posted: Thu May 02, 2002 9:09 am
by Pimeasielu
i have HD44780-Based LCD Module in Parallel Printer Port
so i just wonder is there another good prog to my lcd beside LCD Smartie ???
Posted: Thu May 02, 2002 10:22 am
by ultraspider
LCDC does only show my lan traffic. can you tell me how to change the settings to have the internet traffic (using a second ethernet card and a adsl modem)
thanx in advance
Posted: Thu May 02, 2002 10:28 am
by santa
You should be able to show the traffic on the NIC with the adsl modem on... You just have to choose the NIC with the modem on... system -> network -> currently -> upload or download -> and then the NIC
/SanTa
Posted: Fri May 03, 2002 9:41 am
by ultraspider
On 2002-05-02 10:28, santa wrote:
You should be able to show the traffic on the NIC with the adsl modem on... You just have to choose the NIC with the modem on... system -> network -> currently -> upload or download -> and then the NIC
/SanTa
nope, it doesn't work. it found some info about some traffic but there is no internet traffic. all of the traffic reported are some very low data transfer like 882 Byte when i have allready downloaded 70 Mb and more...
Mat can you tell something about that ?
Posted: Fri May 03, 2002 10:37 am
by Mat-Moo
Yep you are looking at the "Current" throuput of traffic, try looking at "System - Network - Total - Upload/Download - IF card" instead
Posted: Fri May 03, 2002 6:21 pm
by ultraspider
in fact, i have two ethernet card (one for the adsl modem and one for the lan) and LCDC shows IF0 - total, IF1 MS TCP Loopback interface, and IF2 - intel 21143-based PCI Fast ethernet adapter (for the lan). But it does not show my second ethernet card (used to plug my modem). is there a compatibility conflict or something ?
can you help ?
Posted: Sat May 04, 2002 4:51 pm
by Mat-Moo
Hmm that's odd, I can't understand why they are not both coming up - I can only report what I see, but if you care to e-mail me direct
Matthew@DPS.uk.com perhaps I can send a test app and see if we can sort this out.