Page 1 of 1
Posted: Thu Apr 25, 2002 11:59 am
by mrmagoo_83
I am looking at buying an LCD from MO. But I dont know which would be better for me right now. I am wanting to monitor my Temps and be able to control a fan for each of the temps, but I also want to use it on my WinAmp. SO I have come down to two choices.
MO-s NK204 standard and the LK204-25PC. Now I have no idea which one to get. I see bit-wares sale on that one, but should I just go with the PC version with six GPOs and go from there? What are yalls opinions?
Posted: Thu Apr 25, 2002 12:48 pm
by Henry
the LK204-25-PC has High Power GPOs where you can connect a fan directly to it and have them turn on and off depending on the temp or by a keypad or jsut software...
Posted: Thu Apr 25, 2002 1:53 pm
by mrmagoo_83
What about all three? Keypad, temp, and software? Like if I wanted to attach the fan to a switch for a constant on, and then to the MB Monitor so when the temp changes without the switches on it will come on? Cause if I start running Q3 I would like to turn them on so it will stay cool.
Posted: Thu Apr 25, 2002 2:00 pm
by Henry
that would be all software, and I do belive LCDC will allow you to do that.
Posted: Thu Apr 25, 2002 3:37 pm
by mrmagoo_83
Thanks Henry you are a great help. I will figure that out.
I have a friend who wants one too, but he does not have a Hardware monitor on his motherboard, so I am currently working on a Thermistor setup to activate the keypad so the software will turn on different fans. Shouldnt be too hard.