Page 1 of 1
Posted: Sat Apr 20, 2002 6:52 pm
by abe2000
As the LK204-25-PC has 2 pcbs, I was thinking of separating them.. and put the connector-pcb inside the comp, but will there be any big delays then? or is it like having a bit longer serial cable? why I want to do this is because it's too thick to fit behind the chieftec chassi front door right now.. if there's gonna be delays, I'll have to desolder all pins and connectors, and put them on a custom pcb or something.
<font size=-1>[ This Message was edited by: abe2000 on 2002-04-20 18:57 ]</font>
Posted: Sun Apr 21, 2002 12:37 am
by Henry
We have in the past did something similar to a few of our OEM customers. It is possible to seperate the two PCBs and connect them with a ribbon cable for example. I would keep it as short as possible. Also, please note, you will void your warrantee if you do this
Posted: Sun Apr 21, 2002 4:14 am
by abe2000
Ok, thanks
Posted: Thu Apr 25, 2002 7:08 am
by abe2000
Posted: Thu Apr 25, 2002 7:14 am
by CyPher
nice work man...
Posted: Thu Apr 25, 2002 7:21 am
by abe2000
Thanks!!
Posted: Thu Apr 25, 2002 9:35 am
by Henry
impresive!
Posted: Thu Apr 25, 2002 10:53 am
by PatB
Yup, Agreed, very nice indeed...
Posted: Thu Apr 25, 2002 2:46 pm
by WhyPush
Nice work... Now for a little cable wrapping...
Posted: Thu Apr 25, 2002 4:30 pm
by abe2000
Thanks guys
And yea, I gotta fix those cables
Need some buttons too.. and leds!
