Matrix Orbital Corp

I just purchased a LK204-25-WB and can not get the vertical bars to display in the narrow format. I send the [254] [115] codes but they show as wide bars.

Any help would be appreciated!

--------------------------------------------
Found the answer myself. A product change notification explains that Custom Characters must be created.

http://www.matrixorbital.ca/PCNs/LK%20S ... 204-25.pdf

Hello,

Thank you for posting on the forum.

Sorry for not getting back to you soon enough, but hey, you found what you needed. I am attaching here though the custom char definition for skinny / narrow vertical bars to make your job easier:

/254//193//2//0//14//14//14//14//14//14//14//14/
/254//193//2//1//0//0//0//0//0//0//0//14/
/254//193//2//2//0//0//0//0//0//0//14//14/
/254//193//2//3//0//0//0//0//0//14//14//14/
/254//193//2//4//0//0//0//0//14//14//14//14/
/254//193//2//5//0//0//0//14//14//14//14//14/
/254//193//2//6//0//0//14//14//14//14//14//14/
/254//193//2//7//0//14//14//14//14//14//14//14/
/254//192//2/

Try clicking the 'Demo Thin Bar' button in uProject after sending the commands above. You should have your narrow vertical lines.

Thanks,