Page 1 of 1
Posted: Wed Mar 20, 2002 1:01 pm
by Bodee
I have an OOPIC 1 and a GLK12232-25. I have not gotten it to work yet. Do I use pins 1&3 or pins or pins 31&33 on the 40 pin connector or use the I2C Network pins. I want to use the I2C but so far I've been unsuccessful(only spitting out garbage characters.) Do I need pullup resistors somewhere? How and what do I need to do to get this setup to work?
Thanks in Advance, Bodee
Posted: Wed Mar 20, 2002 1:40 pm
by relix
mmmmmm... I know there's a place somewhere on the net that explains how you have to control an MO LCD with a OOPIC ... I suggest you search for it on google or something, as I don't know the address...
Posted: Wed Mar 20, 2002 1:43 pm
by Henry
Give these people a shout, maybe they can help. I have never worked with a OOPIC before. Let us know what you come up with.
http://groups.yahoo.com/group/oopic/
_________________
Henry J.
Technical Support
Matrix Orbital
<font size=-1>[ This Message was edited by: Henry on 2002-03-20 13:47 ]</font>