it works now!
Posted: Mon Jun 11, 2007 10:27 am
Hi again,
I switched back from I2C to RS232 to check the firmware version, it looks like my firmaware version is 5.4 so I switched to I2C again and with the same software I had before I can read keypad but with the problem that you could find in update notice.
thank you for your help anyway
Mehrdad
I switched back from I2C to RS232 to check the firmware version, it looks like my firmaware version is 5.4 so I switched to I2C again and with the same software I had before I can read keypad but with the problem that you could find in update notice.
thank you for your help anyway
Mehrdad