Matrix Orbital Corp

Posted: **Mon Jan 15, 2007 5:49 pm**

I have an LVPK162-12 LCD w/ PCB R3.0. I was reading the manual and could only find the default baud rate to be 19.2 kpbs. Does anyone know whether it is asynchronous or synchronous communication and whether it is 8 or 9 -bit communication at factory defaults?

Thanks,
Carl

Posted: **Tue Jan 16, 2007 4:47 pm**

Hello Carl,

Thank you for you post.
The RS232 settings:
Asynch, 8 bit, 1 stop bit, no parity, no flow control

I hope this helps,