Dallas one wire connectors; What all can they be used for?

Fighter2a · Post by **Fighter2a** » Thu Jan 11, 2007 2:47 am

besides the temperature probes. I tried searching and couldn't find anything. Any help/ideas would be appreciated.

Raquel · Post by **Raquel** » Mon Jan 22, 2007 9:52 am

Hello Fighter2a,

Thank you for your post.
Yes, the Dallas 1-Wire connector on our modules is basically for temperature probes; but then you can connect a generic Dallas 1-Wire slave (with a connector to connect as such) and write an application for it. Do you have a Dallas 1-Write device in mind?

Best Regards,

Fighter2a · Post by **Fighter2a** » Mon Jan 22, 2007 10:57 am

Thanks for the reply. I don't have anything planned yet just curious.

Post by **Henry** » Wed Jan 24, 2007 12:30 am

I have seen humidity sensors, GPIO's, temp sensors, preasure sensors and many other ones.

Raquel · Post by **Raquel** » Fri Jan 26, 2007 11:11 am

Thanks, Henry.
I was not aware.