Help with my MX212, It went dark

mylllone · Post by **mylllone** » Sun Dec 17, 2006 5:37 pm

I restarted my computer today (it generally stays on 24hrs a day) when it restarted I noticed my MX212 seemed to be off, (I dont know if it was working before I restarted the computer or not, but I think I wouldve noticed if it was off before I had restarted) when I looked closely, I saw that it wasnt off but was very dark, it seemed as if the blue light was either off or just barely shining and I could see the letters that I usually have scrolling accross the screen are there, but almost impossible to see.

Please help!!!!!!

Nathan

Paradigm · Post by **Paradigm** » Wed Jan 03, 2007 6:11 pm

Two things jump to mind, contrast and backlight. It might juts be that either of those are set to a strange value. Try setting the backlight to the brightest value, and the contrast to about the middle. I believe that you can do that through LCDC or you can use uProject that is on the Matrix Orbital.ca site at:

http://www.matrixorbital.ca/software/so ... /uproject/