Help pluggin mx2 internally???
Posted: Fri Oct 14, 2005 6:36 am
Can anyone help me i want to connect the mx2 internally on my msi k8n diamond but wasnt sure on how could someone help please?
Thanks
DAve
Thanks
DAve
Matrix Orbital home of Serial RS232, USB, I2C, TTL, RS422, HDMI, EVE, SPI, QSPI, LCD, VFD, TFT, OLED, HMI and Touchscreen displays
https://www.lcdforums.com/forums/
Hi Miles thanks for replying yes i have a internal usb cable as shown.Miles wrote:Hi equilibrium,
Thank you for contacting Matrix Orbital forums. First off, do you have an internal USB cable like the one shown here: http://www.matrixorbital.com/product_in ... munication
Tom wrote:Hi equilibrium,
Here is the following configuration.
+5V goes to Vcc(Pin1)
D- goes to Data0-(Pin 3)
D+ goes to Data0+(Pin 5)
Gnd goes to Ground(Pin 7)
D- might be shown as something else like P- on your board, but the configuration will be the same.
If you have anymore questions or concerns, please feel free to post them.
Best Regards,