Matrix Orbital Corp

I am having problem getting a recently purchased VK204-24-USB to work on osx.

the USB profile of the device is

Device VendorID/ProductID: 0x0403/0xFA04 (FTDI)
Device Version Number: 0x0400
Manufacturer String: 1 "Matrix Orbital"
Product String: 2 "LK/VK204-24-USB"

I seem to remember that the FTDI drivers are looking for

Device VendorID/ProductID: 0x0403/0x6001

unless I have something wrong? also I could not find/get to the dowload sections of the Matrix Obitals website to see if there was a custom driver?

did you guys change anything?

Hi vinthewrench,

Thanks for dropping by the forums. We do not have a USB driver for OSX, but FTDI does have support for it, here is a OSX Installation guide made by them...

http://www.ftdichip.com/Documents/Insta ... _Guide.pdf

The driver will have to be modified to include the displays PID, which is 0xFA04 in your case.

The driver...

http://www.ftdichip.com/Drivers/FT232-F ... er.pkg.hqx

Since we have not done this, nor do we have a OSX computer at the office, we cannot test the driver. Let us know how it goes, we'll do our best to help you out.