Page 1 of 1

MX 412 LK204-24-USB Max Wattage for fan GPOs

Posted: Wed Dec 15, 2004 12:41 pm
by Yuriy
A quick question concerning the maximum wattage each of the fan GPO FETs are capable of. If I'm not mistaken the FETs used are NDS335N and are rated at 1.7A so if the duty cycle was 100 percent it could get very hot. However, on resistance is very low for these devices.

Posted: Wed Dec 15, 2004 1:44 pm
by Henry
I ran them at 12 Watts continually with no problems... and that's the official spec we say. You probably could go higher, but ...