Page 1 of 1
Posted: Wed Jan 16, 2002 8:08 pm
by Mr_Lore
I have a matrix orbital lk204-pc, lcd center 2.0 works fine but digibus will not load due to missing or corrupt vblcd.ocx file, plz help a noob out.
Posted: Thu Jan 17, 2002 9:03 am
by Mr_Lore
forgot to mention my hardware,
Soyo Dragon Plus motherboard
Adaptec 19160 SCSI card
Seagate Cheetah X15
Geforce2 Ultra
running Windows XP prof.
Posted: Thu Jan 17, 2002 9:18 am
by Henry
I have seen this too, the digibus software never got 100% tested.... I think I have a couple different version of that file... I'll post them here when I track hem down.
Posted: Thu Jan 17, 2002 9:30 am
by Mr_Lore
I fixed it! weeeee! I am the sm4rty, fyi, the vblcd.ocx file that lcdcenter2.0 installs is a different file than the one included with Digibus, so I switched em, I put the included vblcd.ocx that came with digibus in the system32 directory. LCDCenter2.0 still works and now Digibus also works. The file included with LCDCenter is 4kb larger than the Digibus ocx file, but all functions work on both apps so I'm happy.
Posted: Thu Jan 17, 2002 9:43 am
by Henry
On 2002-01-17 09:30, Mr_Lore wrote:
I fixed it! weeeee! I am the sm4rty, fyi, the vblcd.ocx file that lcdcenter2.0 installs is a different file than the one included with Digibus, so I switched em, I put the included vblcd.ocx that came with digibus in the system32 directory. LCDCenter2.0 still works and now Digibus also works. The file included with LCDCenter is 4kb larger than the Digibus ocx file, but all functions work on both apps so I'm happy.
You are my hero
So all you have to do is manualy put the OCX file into the system32dir and everything is OK? (I would like to fix it in the file)
Posted: Thu Jan 17, 2002 11:57 pm
by Mr_Lore
yep,put the included vblcd.ocx that is in the DigiBus ZIP into the system32 dir.