Page 1 of 1

Black and blue...

Posted: Mon Jun 07, 2004 7:20 pm
by FreeBaGeL
Hey, I saw this pic in the gallery:

http://www.jason.cundall.dsl.pipex.com/page1.JPG

I was just wondering if there were any MO PC bay insert LCD's that came in this black background with the blue writing? I have a sliver case with blue CC's and such, and I'm not a big fan of the blue/white combo in the LCD's, so this black background with blue writing would be perfect but I didn't see it on the site. Thanks.

Posted: Tue Jun 08, 2004 1:51 am
by Henry
The display in that picture is our VK204-25-V.... it is a VFD display and a blue or dark gray filter. For the best combination would be a VK204-24-USB, and probably a blue filter from us, or your own gray/black one.

Posted: Tue Jun 08, 2004 6:20 pm
by FreeBaGeL
Ah, thank you for clearing that up. Would the VFD have the same functionality/features in my PC as the MX series LCD's, and would it be relatively as easy to set up? Also, would it fit into one of the PC bay inserts (assuming I went for the VK202-25 and the smaller PC bay insert)? Thanks again.

Posted: Tue Jun 08, 2004 6:57 pm
by Henry
for a two line display(and single bay insert), wheck out the MX3 series, for a 4 line display (and a double bay insert) check out the MX5 series.

Posted: Wed Jun 09, 2004 9:12 am
by FreeBaGeL
And the MX3 will work with the blue filter to give me the blue on black effect and still have all the same functionality as the MX2 series?

If so, which out of the MX320, 321, 322, 323, and 324 would yield the best results with the blue filter?

Posted: Thu Jun 10, 2004 1:37 pm
by Bernie
Hello, the (VFD) MX322:

MX320 no filter
MX321 Gray Filter
MX322 Blue Filter
MX323 Red Filter
MX324 Green Filter

Hope this helps.

Regards,
Bernadine