Page 1 of 1
Splitting GPOs?
Posted: Sun May 02, 2004 1:32 pm
by Xtant
I know I'm asking a zillion questions but I figure if anyone knows it's going to be you guys. I have a GPU fan thats noisy as hell due to the fact that it runs at 6800rpm or some such number. Can I split one of my high output GPO's to run 2 fans? A case fan and the GPU fan and tie them to the same thermal event and or percentage event?
Posted: Mon May 03, 2004 11:56 am
by Miles
Hello...
Yes you can run two fans per GPO. A couple things you must remember:
1. Only one of the fans will be able to report RPM.
2. The maximum current per high powered GPO is 1 Amp.
3. To utilize the voltage output of the GPO, ensure your fans are connected in parallel, not series.
Posted: Mon May 03, 2004 12:34 pm
by Xtant
Miles wrote:Hello...
Yes you can run two fans per GPO. A couple things you must remember:
1. Only one of the fans will be able to report RPM.
2. The maximum current per high powered GPO is 1 Amp.
3. To utilize the voltage output of the GPO, ensure your fans are connected in parallel, not series.
It's been forever since I took basic electronics, how do I make sure I'm in parellel and not series.
Posted: Mon May 03, 2004 2:03 pm
by Miles
Probably the easiest way to explain it is do not "daisy chain" the fans, rather have an individual connection to power and ground.
