Page 1 of 1
Posted: Thu Jan 03, 2002 3:24 pm
by Rickard
Check out my case in the pic below.
Do you have an LCD that will fit in my 2 3.5" places below my floppy? Thats the only space i have left. Would also appreciate to know what other stuff i need to get it to work, like serial cables etc..
Posted: Thu Jan 03, 2002 3:28 pm
by Henry
I saw your posts on some UK boards
I would recomend using the MK2041 which is a mounting kit. Glue the two blank inserts together and then cut out a hole for the LCD.
This GLK12232-25 was mounted in 2 3.5 drive was by doing exacly what I said. Then you need a power and serial cable.
_________________
Henry J.
Technical Support
Matrix Orbital
<font size=-1>[ This Message was edited by: Henry on 2002-01-03 15:28 ]</font>
Posted: Fri Jan 04, 2002 2:14 am
by Rickard
Thanks Henry!
This is the info i needed. I will place my order right away
Posted: Fri Jan 04, 2002 9:18 am
by Henry
NP
Posted: Sun Jan 06, 2002 7:02 pm
by gordy_hand
Would a four line lcd fit in there henry ?
Posted: Sun Jan 06, 2002 9:01 pm
by Henry
On 2002-01-06 19:02, gordy_hand wrote:
Would a four line lcd fit in there henry ?
A GLK12232-25 is the same physical size as a LK204-25 (4x20 LCD)
Posted: Mon Jan 07, 2002 7:39 am
by gordy_hand
On 2002-01-06 21:01, Henry wrote:
On 2002-01-06 19:02, gordy_hand wrote:
Would a four line lcd fit in there henry ?
A GLK12232-25 is the same physical size as a LK204-25 (4x20 LCD)
Thought it was ruffly the same
Ta