Page 1 of 1
Join the dots!
Posted: Mon Jan 05, 2004 2:55 pm
by zander
Ok, I'm being pretty slow here I think!
Created a custom keypad with a selection of switches, just trying to wire them up but want to make sure I do it right!
There is a set of 4 in close proximity and another 2. Just going to take another go myself but any help would be appreciated!
Posted: Tue Jan 06, 2004 5:30 pm
by Brillig
Did you get this figured out? I could help if you have not.
Posted: Wed Jan 07, 2004 5:15 am
by zander
At work at the mo so can't upload the diagram of how I think i'll try it.
Basicly wired contact 1 of each switch in the four cluster together to a row then contact 2 to each column. Then I did the same with the second cluster of two but the other way round.
If I get a chance i'll try it this evening, but if you feel like playing in paint i'd appreciate confirmation that what i'm doing is right!
Thanks for the help!
Posted: Tue Feb 03, 2004 9:02 am
by zmoreira
Brillig wrote:Did you get this figured out? I could help if you have not.
Brillig: I am wondering how to do the same thing, can you help? Just a quick hot-to to get me started...
Posted: Tue Feb 03, 2004 3:14 pm
by zander
Mine worked the way I did the diagram, just as long as you connect each switch to one row and one column.