Matrix Orbital Corp

Posted: **Tue Dec 02, 2003 3:24 pm**

hi!
just bought this nifty thingy from my friend.. dunno where he got it from.. because he did not give me any cables or manuals or anything.. so i modified the floppy powercable as the manual said so i've got power.. but no connection.. i bought a null-modem cable because thats the only serial cable i could find (i live in a small town)

and a mini gender changer and connected it to the lcd-display.
but either lcdc or lcd-tester will detect it. and it seems like i can connect to it manually but when i send text to it all i see is the blinking dot in the corner.. sounds familiar to anyone??

edit: is it the cable that needs to be replaced?

Posted: **Wed Dec 03, 2003 1:46 pm**

Hello...

With our units you need to use a straight through cable (pin1 to pin1, pin2 to pin2, etc.) for communication. A null modem will not work. Straight through cables are common and should not be too hard to find!!

Posted: **Sat Dec 06, 2003 3:01 pm**

alright! thanks!

Posted: **Thu Dec 11, 2003 9:11 am**

just thought of something, would a mouse "cable-lengthener" work? think i have one laying around..

Posted: **Fri Dec 12, 2003 2:45 pm**

As long as it's pin configuration matches up...I don't see why this wouldn't work...

Matrix Orbital Corp

no connection to my lcd2041 (rev1.5)

no connection to my lcd2041 (rev1.5)