Matrix Orbital Corp

Posted: **Sat Oct 04, 2003 2:54 pm**

Ok I got my Diodes and Capacitors to get my fans conected... Now I only found a 47Uf Capacitor... would that work?
I use a MX212 rev1.0
And also I have to conect a regular floppy cable to it it does not to be modified.. Am I right?
Anything I need to do before I roll the dice?
Thanks in advance!

Posted: **Mon Oct 06, 2003 9:07 am**

Just to double check before you proceed...I take it you want to modify your low pwered GPO's to make a total of 6 high powered GPO's...??

You do not need to modify your floppy power cable, works as is!!

Posted: **Mon Oct 06, 2003 10:02 am**

No I just want the 3 regular 12V GPO

All I have to do is change the jumper right?

But I would also like to know how to make all the GPO'S 12V (all 6 of them)
Would com handy later in the feature!

Thanks Miles!

Posted: **Mon Oct 06, 2003 10:08 am**

A 47uF capacitor will work just fine...!!!

Matrix Orbital Corp

One more question about fans :)

One more question about fans :)