Page 1 of 1
GOP Pin Connectors, what do you use???
Posted: Mon Jun 09, 2003 8:22 am
by Robmiester
*** newbie alert ***
Hello, I have a MX212.
I would like to start using the GPO's. Is there a premade connector that will fit on the GPO pins? I think I read somewhere about using a CDrom audio connector for this?
What does the group use? Can I get it at RadioShack
????
Posted: Sun Jun 22, 2003 12:49 pm
by Cheese
Yeah CD audio cables work but ideally you want two pin 0.1" pitch pin sockets... radio shack should stock them.
Rob.
Posted: Sun Jun 22, 2003 11:04 pm
by linear
Alas, nothing of any value is stocked at radio s*ack, except for a few things at absurdly inflated prices, which does not include the connectors we're after. I'd suggest making friends with someone that services PCs and has access to large volumes of discarded cases. Even AT cases will have a handful of the very item you seek.
Posted: Thu Jun 26, 2003 8:38 am
by bluetooth
If I knew what those things are called, I could find a DigiKey part # for you....but I looked through their catalog last night and it seemed that all the connectors were fancier than what you need.
~Adam
Posted: Thu Jun 26, 2003 2:30 pm
by linear
The problem with catalog ordering or getting them from anywhere, is you have to cripm them to the wire yourself, that's a big drag.
http://www.futurlec.com/ConnHead.shtml
There's connectors for headers, pins sold separately, so watch out.
Posted: Sun Jun 29, 2003 7:15 am
by bluetooth
That is true, although it is not so bad if you have a propper crimping tool.
I imagine any of those instances where institutions give / throw away tons of old PCs would be an excelent opertunity to snag some connectors. They've been using those things at least since I got my first compy in 1992! Probably longer than that.
~Adam