Matrix Orbital Corp

i have a few questions... i have a relativly cheap case that has your basic power button in fron but in back there is also a powere switch. When i shutdown my comp i dont flip the switch but for some reason power goes through my usb and ps/2 ports so my lcd doesnt turn off. i checked my bios and there is no usb powere there. how can i set it up to turn off my lcd(backlight and what not) when i turn off my comp. i use a mx212 w/ lcdc

also can you hook up 2 2/20 line lcds to make a duel display?(4/20)

The backlight on the current MX2 displays will not turn off when the system shuts off, all I did in LCDC was create an event to turn off the backlight on shutdown and turn on the backlight on power up.

And no, if the software supported such a feature, probably, but no current software does.

i set this up but even after shut down my screen re lightss up...

bump