Page 1 of 1
power supply question
Posted: Fri Apr 25, 2003 6:25 pm
by dans
I
Posted: Sun Apr 27, 2003 6:19 pm
by SilmarilS
The power needed by these LCD is far below anything that can be harmfull for PC power supplies.....
In the 100mA or 0.1A on 12V is very low,,,,
Just connect it to your 200w PSU and don't worry about it!!
Posted: Mon Apr 28, 2003 1:09 pm
by Henry
WHy not get a lk202-24-USB? then you only need a usb cable for power and communication.
Posted: Mon Apr 28, 2003 3:15 pm
by Miles
Our LK202-24-USB draws only 130 mA which is within spec. if you did decide to go with a USB version.