Page 1 of 1
MX series high GPO question :)
Posted: Thu Mar 27, 2003 6:57 am
by JeffPh
Hi,
I just got my MX 222 USB
I was just wondering about GPO 4, 5 & 6. Can i transfer the connector to the +5v so i can use it as a Low power GPO? move it to the left coz its on the right side (last row of the GPO pins). Do i need a resistor for it if am going to plug LEDs on GPO 4, 5 and 6 ?
Thanks.
PS am getting a camera so i can post pictures it looks awesome great product
Let me know when the 204-25 PC USB comes out this is a elite product
Posted: Thu Mar 27, 2003 10:18 pm
by Henry
the "high" power gpos do not have any current limiting on them, so you will need to add a resistor.
Posted: Fri Mar 28, 2003 3:10 am
by JeffPh
will it have 5v? if i transfer the connector?
Posted: Fri Mar 28, 2003 2:53 pm
by Miles
Hello...
If you transfer the jumper, the high powered GPO's will have 5 Volts. Be aware that these GPO's do not have current limiting resistors.
Posted: Sat Mar 29, 2003 2:52 am
by JeffPh
Thanks guys i transfered the jumper and it works
i only used a 100 ohm resistor for a 3.6v led thanks a lot......
great support
Posted: Wed Apr 02, 2003 3:43 am
by Cheese
...now where are those pictures?
Can I ask what you're using six LED's to display?
Rob.
Posted: Wed Apr 02, 2003 8:59 am
by JeffPh
hi cheese am getting a digi cam
its at the office
LED :
1: Blue Led : email notification
2: Blue Led : Temp monitor flash temp >= 44 , strobe temp >= 48
3: Red Led : Temp monitor flash temp >= 50, strobe temp >= 55
4: Blinking tri color led : Set to strobe when winamp is on
5: non yet suggestions welcome
6: non yet suggestions welcome
TX: blue led
RX: blue led ( doest blink tho i guess he got nothing to recieve )
The MO 222 is too awesome altho am still waiting for the 204-25 USB amma get another for my office comp. this time a black lian li case.
Am using a PC 65 now it looks elite
Cheese u from bit tech right? BTW i joined UDS @ bit tech
PS i also got the lian 3.5" temp monitor and changed the back light to blue
looks nice all blue now
Posted: Wed Apr 02, 2003 9:09 am
by Cheese
Hehe sounds good
Yep I'm from bit, cheers,
Rob.