Page 1 of 1
How many fans
Posted: Fri Feb 21, 2003 11:00 am
by Zezzo
I have recently purchased a LK202-24-USB display to go into my thermaltake XaserII case which has 5 fans. Can i somehow hook all 5 fans to the GPO's and how? I am new to this whole LCD thing but it sure looks deadly in my case. Any help would be greatly appreciated cuz my case sounds like an airplane with all fans running at full.
Posted: Fri Feb 21, 2003 4:37 pm
by Miles
Hello...
The USB has 3 high power GPO's that can run three of your fans easily. All you have to do is place the jumper as indicated in the manual. As for the other two fans you will have to do some modifications to the remaining GPO's since they have current limiting resistors that only allow a max of 20 mA output. For the remaining GPO's, check out this link on how to modify:
http://www.lcdforums.com/forums/viewtopic.php?t=1036. I hope this will help! For further information you can refer to our manual under section 2.2