Matrix Orbital Corp

My keypad is set up in the following way:
C = Enter, D = Up arrow, E = Down arrow, I = F2, J = F1, K = left arrow, but there is no corresponding key for the Right arrow. I'm using the newest version of LCDC with a MX213. I'm wondering if anyone out there has seen this configuration or what?

I figured it out, the keypad was plugged into the wrong pins on the back of the LCD, shifting the plug one place to the right gave me the following settings
Up = K
Left = R
Down = L
Right = F
Enter = J
F2 = P
F1 = Q

I know the codes in the manual where wrong, they should have been:

Enter = J
F2 = P
F1 = Q

UP Arrow = K
Right Arrow = F
Down Arrow = L
Left Arrow = R

However looks like the lead for the keypad was also wrong Well done for figuring it out!