Matrix Orbital Corp

Posted: **Wed Jan 22, 2003 11:03 am**

I have two 2041 lcd and I want to put it on cascade with my PC using the rs232 port.

I have read a lot of messages and the faq of the LCD but I didn't found how I can use my rs-232 port to use it with I2C and the necessary hardware interface.

Do you have any code example or any product to do this.

What do I need?

really thanks

Adri

Posted: **Wed Jan 22, 2003 11:15 am**

I2C and RS232 are two totally different languages... you cannot use a RS232 port to talk I2C. I have seen on the net making a Parallel port talk I2C before. It required some hardware and software.

Posted: **Wed Jan 22, 2003 11:20 am**

but is there any available RS-232 == I2C conversor?

Posted: **Wed Jan 22, 2003 11:36 am**

Honestly I do not know... I have never looked for one and I do not know of one. All I have seen are I2C expansion cards.

Posted: **Wed Jan 22, 2003 11:37 am**

and what is the use of the I2C expansion cards?

Posted: **Wed Jan 22, 2003 11:51 am**

It's like a Serial port or Fire Wire expansion card, it just gives you a number of I2C ports...

Matrix Orbital Corp

starting with I2C

starting with I2C

any hardware?

?