Posted: Sun Apr 07, 2002 2:42 pm
do the manual override and then try it?
Matrix Orbital Corp
Matrix Orbital home of Serial RS232, USB, I2C, TTL, RS422, HDMI, EVE, SPI, QSPI, LCD, VFD, TFT, OLED, HMI and Touchscreen displays
https://www.lcdforums.com/forums/
Can I use the fan control for the LK204-25PC on the LK204-25
Page 2 of 2
Posted: Sun Apr 07, 2002 3:27 pm
Er.... sorry i don't understand....
Posted: Sun Apr 07, 2002 4:13 pm
Well, i think i understand.
But how can i do a manual override?
I didn't find anything with a research on the forum...
But how can i do a manual override?
I didn't find anything with a research on the forum...
Posted: Sun Apr 07, 2002 6:45 pm
Look in the manual for the LK204-25-PC for the manual over ride.On 2002-04-07 16:13, |XLM|Phoenix wrote:
Well, i think i understand.
But how can i do a manual override?
I didn't find anything with a research on the forum...
_________________
Henry J.
Technical Support
Matrix Orbital
<font size=-1>[ This Message was edited by: Henry on 2002-04-07 18:46 ]</font>
Posted: Mon Apr 08, 2002 4:20 am
it doesn't work.... 
Posted: Mon Apr 08, 2002 5:28 am
Hummmm....
That's strange...
When the communication speed is different between Smartie 5.0 and the MO, it displays random character (like the "matrix code", but honrizontaly), and when the speed are the same, "POOF!!", nothing is displayed....
Howover, the MatrixOrbital Demo softawre works perfectely at the same speed!
I don't understand.....
That's strange...
When the communication speed is different between Smartie 5.0 and the MO, it displays random character (like the "matrix code", but honrizontaly), and when the speed are the same, "POOF!!", nothing is displayed....
Howover, the MatrixOrbital Demo softawre works perfectely at the same speed!
I don't understand.....
Posted: Tue Apr 09, 2002 1:35 pm
Use the contrast save and speed program to reset the displays info.